COJ-E104 General Purpose Silicone Sealant

General Purpose Silicone/GP Silicone/GP Silicone Sealant: 1.Fast cure,high strength 2.General sealing and glazing application

GENERAL PURPOSE SILICONE/GP SILICONE/GP SILICONE SEALANT

CHARACTERISTICS:

•One-component, acetoxy cure silicone sealant for general purpose applications.

•Fast cure,high strength,provides a flexible bond and will not harden or crack.

•Resistant to sunlight and weather extremes.

BASIC USES:

•Various interior decoration glass, aluminum alloy and glass device projects.

•General sealing and glazing applications.

•Seal and cementation of aluminum windows & doors, storefront, show window, skylight and corner line.

•Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material.

TECHNICAL DATA

Property	National Standard GB/T14683-2003	Measured Value	Test Mothod
Flow/Sag/Slump(mm)	≤3	0	GB/T13477
Extrusion(mL/min)	≥80	1526
Tack-Free Time(min)	≤180	10
Hardness(HsA)	/	27	GB/T531
Thermogravimetry%	≤10	3.5	GB/T13477
Elastic Recovery%	≥80	93
Tensile Strength MPa Standard Condition	≥0.4	0.79
Elongation at break%	/	220
Joint movement capability%	±20	±20	ASTMC719
Shelf life	12 months stored below 27oC in cool, dry places after the date of  production.

APPLICABLE STANDARD:

 National Standard: GB/T14683-2003.

INSTRUCTION:

 See ≤KNG SEALANT APPLYING TECHNOLOGY GUIDE≥

  

Colors:

GL 288 acrylic sealant is available three standard colors: white, black, grey and other colors base on custormers' requirements.        

Storage and shelf life:12 months shelf life if stored below 27oC in cool, dry places after the date of productiion.

Caution: 1. When skin or eye contact occurs, immediately flush with water for 15 minutes, get medical  attention, if irritation persists. Fully cured sealant is not hazardous. 2. Used in the well-ventilated environment. 3. Keep out of reach of children.

Limitations: 1. Can't be used to marble, granite and other alkalescence materials;.2. Not recommended for oil contained or blended surfaces.

3. Not suitable for confined joint(the sealant need atmospheric moisture for cure).4. Not suitable to use when the temperature of the materials surface is lower than 4oC or higher than 40oC .

Inner Packing:300ml plast cartridge, 25PCS/CTN

Outer Packing:Dimensions for 25pcs of 300ml: 25.3×25.3×24.5 (cm)

COJ-E104 General Purpose Silicone Sealant